Full traceability
Every cycle is timestamped and stored with its full temperature and pressure curve — one record per load, never lost.
IoT-connected sterilization
Autoclaves that report every cycle, live.
Works with autoclaves and steam sterilizers alike.
Internet-connected sterilizers that log temperature, pressure and phase to the cloud — full traceability, remote oversight and audit-ready records for every load.
CYCLE 134B · A-07
LIVE
Temperature
134.2°C
Pressure
2.16bar
Phase
Sterilization
- No PC required
- No software installation
- Works with existing sterilizers
134 °CClass B steam cycles
< 1 sCloud logging latency
24 / 7Remote monitoring
MDRAudit-ready records
The connected advantage
Why connect your autoclave
Remote monitoring
Follow live cycles from any device. Supervise several sterilizers across sites from a single dashboard.
Instant alerts
Get notified the moment a cycle fails, a parameter drifts or maintenance is due — before it costs you a load.
Audit-ready
Export complete sterilization records for inspections and quality systems in a few clicks.
Why AutoclaveXpress
Everything a connected sterilizer should be
- No PC required
- No software to install
- Internet-connected
- AI-ready
- Remote monitoring
- Multi-site ready
- Audit-ready records
- Predictive maintenance
From chamber to cloud
How it works
A sealed hardware chain takes the cycle from the chamber to a secure cloud record. No clinic-side computer required.
-
01
Sensor
A PT100 probe reads chamber temperature and pressure with laboratory precision.
-
02
Gateway
An industrial RS485-to-Ethernet gateway packages each reading and forwards it on.
-
03
Secure cloud
Data travels over encrypted MQTT/TLS to the AutoclaveConnect cloud and is written cycle by cycle.
-
04
Dashboard
You watch, search and export every cycle from a clean web dashboard, anywhere.
Architecture
From chamber to AI, end to end
A sealed, encrypted data path takes each cycle from the sterilizer chamber all the way to AI analysis — no clinic-side PC in the loop.
Autoclave
PT100 sensorTemperature & pressure
RS485
Ethernet gatewayOn your network
TLS encryptionIn transit, end to end
AutoclaveConnectPro Cloud
Dashboard
AI engine
The product
Order
The AutoclaveXpress Trilogy
One universal kit that turns any autoclave into a connected, traceable device. No data port required.
PT100 probeSenses chamber heat
→
RS485 moduleModbus conversion
→
Ethernet bridgeOnto your network
→
Cloud dashboardLive cycle records
The Trilogy
PT100 probe · RS485 module · Ethernet bridge
+ $20 worldwide shipping · connects any autoclave
$175one-time
Software options
Due today$175
Then renews at
Pay with Stripe · PayPal · Wise
The hardware
Three parts. Any autoclave, connected.
The AutoclaveXpress Trilogy is everything you need to bring a sterilizer online — sensor, converter and gateway, ready to install.
Step 1 — Sense
Temperature probe
Laboratory-grade PT100 sensor with shielded cable, reading chamber temperature with precision.
Step 2 — Convert
RS485 converter
Reads the PT100 signal and converts it into a digital RS485 stream for reliable long-distance transmission.
Step 3 — Connect
Ethernet gateway
Bridges RS485 to your Ethernet/IP network via RJ45 — the link to the cloud.
Universal by design
Works with the sterilizers you already own
The Trilogy connects any autoclave that exposes temperature and pressure outputs — no brand lock-in.
TuttnauerMelagSteelcoGetingeMatachanaMidmarkW&HCISABelimedSciCan
Compatible with most Class B sterilizers. Brand names are the property of their respective owners and do not imply any partnership or endorsement.
Built for inspection
Records that hold up to audit
Connected cycle records support the traceability expectations of EU Regulation (MDR) 2017/745 and the quality systems used in healthcare sterilization. Every load is stored with its full curve, operator and timestamp — ready to export when an auditor asks.
- Per-load traceability with full temperature and pressure curve
- Tamper-evident, time-stamped cloud storage
- One-click export for inspections and quality reviews
- Operator and cycle identification on every record
AutoclaveConnectPro SaaS platform
The cloud platform behind every connected cycle
AutoclaveConnectPro turns each sterilizer into a live, auditable data stream — accessible from any browser, across every site you run.
- Real-time dashboard
- Full cycle history
- One-click PDF export
- Email alerts
- AI cycle analysis
- Multi-site fleet
- Multi-user access
- Audit-ready records
Powered by AI
AI Sterilization Intelligence
Beyond logging, AutoclaveConnectPro analyses every cycle to anticipate failures, surface anomalies and score compliance — turning raw data into decisions.
Predictive maintenance
Spot drift in heat-up time and pressure stability before a sterilizer fails, so service happens on schedule — not mid-load.
Cycle anomaly detection
Each curve is compared to its expected profile; deviations are flagged automatically the moment they appear.
Failure prediction
Models trained on cycle patterns estimate the risk of the next load failing, so you act before it does.
Operator performance
See how loading, cycle selection and timing vary by operator, and standardise on what works best.
Compliance scoring
Every site gets a live readiness score against your quality requirements, with the gaps listed in plain language.
Security & compliance
Built for medical-grade data
HIPAA ReadyInfrastructure aligned with healthcare data rules
TLS 1.3 EncryptionData encrypted in transit, end to end
Audit LogsEvery action time-stamped and traceable
Role-Based AccessGranular permissions per user and site
Cloud HostedRedundant, backed-up, always available
Bring your sterilization online.
Tell us how many autoclaves and sites you run. We'll come back with the right connected configuration and a quote.
Request a quote
contact@iot.autoclavexpress.com